SAM Encoder Settings
Start by finding your ENCODERS
windows in the broadcaster. Create a new Encoder by clicking the +
button.
Next, select MP3
(Normal), then click "OK"
NOTE: This setting may cause
problems with newer computers and sound cards. If so, select MP3PRO.
In the next windows,
you should be in the "Converter" tab. Select Fast Resampling
(Medium Quality if mo3Pro was chosen) in the
Quality drop down, then your desired Format in the Format drop down. It is
recommended to select 80kb/s, 22,1kHz, however you are free to use whatever bit
rate you want up to 128kb/s. Remember, however, the higher the bit rate the
more bandwidth you will need to broadcast. Make sure your internet
connection's upstream will support your desired format.
Next, click on the
SERVER DETAILS tab.
In your rental
notecard, you will find your IP number, your port number and your password.
Enter them in the appropriate areas. Please enter your information
carefully, and remember that the password is cAsE sEnSiTiVe.
You may enter the
other information as you deem appropriate. Then click "OK".
The following is a guide to help you set up your encoders using the SAM3 or SAM4 Broadcaster




Once you have all the information in your encoder and you are ready to begin streaming, click once on your encoder to highlight it, then click the right arrow (to the right of the - button). If everything was set up properly, your status will indicate that it is encoding. If it is not, please make sure you check your settings and passwords,